You have completed your do it yourself painting project and your home has a new, fresh look and feel. You are thinking that the work was well worth the end result as you stand and look around. Then you notice the almost empty cans of remaining paint. Disposing of unwanted paint after the job is done can be a perplexing situation. Just pouring the paint out will be not be a very responsible thing to do as it will be very harmful to the environment, not to mention it is actually an illegal thing to do. The paint will get into the storm and sewer drains and will eventually contaminate the water system. When you clean your paint tools it is better to do this inside rather than washing the paint from the tools into the ground that will eventually end up in the drainage system polluting our water sources. Eco friendly painting is also about disposing of the waste paint in a responsible way.

Paintings Images, Stock Photos & Vectors | Shutterstock

Why is paint so harmful to the environment? Part of the ingredients in water based paint is solid pigments that will make the water cloudy or muddy by adding particles that create sediment in the water. KAWS FAR FAR DOWN Painting for sale This sediment is really harmful to fish as it will clog their gills and stop them from being able to breathe. When the sediment gets bad enough from pollution in the water, the murky water blocks the sunlight and this means that the photosynthesis process of the plants in the water is damaged. Healthy foliage in the water is essential to the health of all the inhabitants of the water. Other ingredients in paints are substances that are biodegradable. As these substances break down in the water, the fish and plant life begin to die off.

Paint that is solvent based has several compounds and organic solvents. These are like oil to water and will not mix easily. Eventually they will mix with the water and when they do they will take oxygen away from the plant life. Paint that is solvent based has harmful environmental ingredients like zinc, chromium, mercury and lead. This kind of heavy metal sediment is pure poison in the water system. There are ingredients in solvent based paint they are toxic to water organisms and fish and can cause tumors to form in the fish. That is not good eating for us!

When you are cleaning your paint rollers and brushes after painting with a water based paint it is best to squeeze as much of the unused paint back into the paint cans. There is a tool designed for doing this with your paint roller to make it easier. Then you can fill a five gallon bucket or empty container with water and wash your brushes and rollers in this until most of the paint is gone. After this water sits for a while, the paint residue will settle in the bottom of the container and then it can be disposed of as a solid waste like the paint left in the paint cans. To cut down on the cleaning process you can put your roller in big plastic bags to keep them fresh until the next use. It is a lot easier and will save the environment as well. Your local solid waste disposal plant will have their own guidelines about disposing of the unwanted paint.

Interior painting of residential homes is a marvelous way to dramatically change the look and feel of your rooms. Doing the paint job yourself is rather labor intensive but when done properly will look like it was done by a professional. If you are not a professional painter, you might make a few mistakes doing the job that will result in problem areas. This is very disheartening when you have invested your time and effort into your project and then end up with problems. To save some disappointments it is best to handle any potential problems before you even begin painting.

Mildew is a big problem in a lot of areas and needs to be handled before applying any paint. If there is already mildew present or to prevent this from happening it is just a matter of using a bleach and water solution to wash the surface. The solution should be a 3 to 1 ratio of three parts water to one part bleach. After applying the solution to the surface to be painted, let it rest for a good fifteen minutes and then rinse it thoroughly. Use a paint that is mildew-proof and use fans to keep the air circulating. The new lower VOC paint products are especially good for the environment and for preventing mildew. Check the labels before you purchase your paint.

Sometimes old paint will begin to blister or form little bubbles and these will need to be scrapped and sanded to smooth the edges before applying new paint. If the blistering has gone all the way to the dry wall or bare wood it means there is a problem with moisture and this needs to be addressed before repainting. To avoid this problem in the future just use a higher grade of paint and primer. Paint that is too thin or if applied too sparingly or if no primer was used on wood, the paint will tend to flake and crack.

Lapping of the painted surface is when a denser and darker color emerges any place two strokes overlap each other. A surface that is really porous must be primed before painting. Problems will arise if the primer coat is not given a chance to dry completely before the topcoat of paint is applied. Try working in one section at a time so that you are not painting over dried paint. Keeping a wet edge while you are painting will eliminate the problem of lapping.

Dull and shiny spots that form on the surface of the painted area can be prevented by using a quality primer before applying the topcoat of paint. These spots happen because there are places on the surface that are more porous than other places or denser affecting the appearance of the painted surface. The primer coat of paint will make the surface to be painted uniform and eliminate this problem.

Leave a Reply

Your email address will not be published.